Instructions
1. Grassland the vehicle on a even surface out from traffic, turn off the engine and disclosed the door.2.The doors of your Chevrolet Tahoe are secured to the vehicle over five hinges. There is one hinge that connects to the roof panel, another that connects to the rocker panel, one that connects to the rear column, another connected to the front support, and one Ending hinge that connects to the Motor lorry fender. Replacing any of the door hinges is simply a incident of using a socket wrench to remove the hinge's bolt and installing a dissimilar hinge. Replacement hinges can be purchased at most automotive shops and are quite inexpensive.
Acquire a helper foothold the door -- or else deposit a physical aid under the backside frame of the door -- before removing any of the bolts. Removing the bolts without supporting the door could goal stress or damage to the other door hinges, or the door itself.
3. Utilize a socket wrench to remove the desired hinge by uninstalling its bolts. Depending on the specific design and year, you may desideratum a deviating amount socket. The door-to-roof panel and door-to-rocket panel bolts are 6mm. The door-to-rear pole bolt is 4mm. The door-to-front pole bolt is 7mm. The door-to-fender bolt is 5mm. Once the bolts are removed, pull the hinge from the door.
4. Attach a replacement hinge and reinstall the bolts with a socket wrench. Open and close the door to test for level swing and correct meeting with the lock.
