Wait for two minutes while the extreme temperature difference between the cold liquid carbon dioxide and the heated cycle has tank causes the dent to pop out.5. Use your damp polishing cloth to wipe off any remaining liquid carbon dioxide form your cycle's gas tank.
This step uses an air duster turned upside down to dispense liquid carbon dioxide.
Instructions
1. Disinfected your cycle's Gauze cistern thoroughly with a damp polishing cloth. Plug in a hair dryer with a high-heat setting and constitute definite that there is enough slack in the cord to easily reach the dent in the cycle's gas tank. Remove the cap from the air duster and set it someplace where you can reach it quickly.
2. Turn the hairdryer on and set it to its highest heat setting. Hold the hairdryer so that the nozzle is approximately an inch away from the dent on the cycle's gas tank. Do not allow the hairdryer to actually touch the dent. Move the hair dryer back and forth over the entire dented area for one minute. Turn off the hairdryer and immediately pick up the air duster.
3. Hold the air duster completely upside down. Direct the nozzle at the dent on your cycle's gas tank, and spray the dent with liquid carbon dioxide for 30 seconds.
4.
Remove a dent from your cycle Gauze container with an air duster and a hairdryer.Whether you get a dent in your cycle tank that you've been definition to capture into your limited bike shop To possess removed, crack this dent Emigration method Homewards elementary. It Testament save you chronology and coin, and Testament not damage your cycle's gloss assignment. You'll be back on the method in no period, dent-free and with your billford peerless approximately five dollars lighter.