The starter solenoid in your vehicle is the switch that provides endowment from the battery to the starter Engine, which turns over the engine and starts your vehicle. When the solenoid goes elsewhere, you can't first step your motorcar and are typically left stranded. Solenoids aren't difficile to install, however whether your van won't embarkation, you itch a road to begin the Motor lorry one date to receive it to the store. This is a dynamite procedure and will cause a shock--but whether you enjoy to conclude it, it can be done.
Instructions
1. Pop the hood and establish the starter solenoid. This will cause a lot of sparks and could pass electrical current through your body if you're not using a rubber-handled screwdriver, so be careful and don't touch the connections for long.4. Quickly remove the screwdriver from the solenoid. If it's left on too long, it can arc weld itself to both terminals, which is a bad thing.
You're going to turn the screwdriver into a manual switch, bypassing the solenoid in the process.
3. Drop the other end of the screwdriver down, touching the metal on the shaft of the solenoid to both terminals on the solenoid. At the same time, have your assistant turn the ignition to start the vehicle. It's typically on the fender well of the vehicle, near the battery.2. Get out the screwdriver and touch the metal end to the post that leads to the starter, opposite to the one that leads to the battery.
At this point, the vehicle should be running. If not, repeat the process.
