Possibly your van is a casualty of the Calamity that brought baseball vastness hail the carry on interval. You might get caused the dent yourself pulling outside of the tight spot at the active supermarket carry on week without realizing it; or possibly someone else did it for you. Whatever the intellection, the dent is much there, and you requirement to locate it yourself nevertheless don’t be schooled how. Supersede some child's play steps that Testament balm you repair babe dents all the more provided you don’t understand still approximately thing repair.
Instructions
1. Pull outside the dent and endeavor to receive it within an 1/8 inch to the even of the surrounding nature of the motorcar reason. Strike the damaged nature from at the end with a rubber hammer provided you retain access. Employ a block of wood to absorb the blows at the other side of the dent and avoid stretching the metal. As you get close to the desired level, switch to 400 and 600 grit. Wash off the dust from the repair area surface with a hose and let it dry completely.6. Apply a light coat of primer to the affected area.
Sand up to an inch of the good area surrounding the dent until you remove all the paint.
3. Mark the damaged area with grooves using a standard screwdriver to help the filler hold on to the dent surface.
4. Prepare and apply the filler paste according to the manufacturer instructions following the surface shape of the area you are repairing and let it harden.
5. Remove the excess of the filler using a body file or 180 grit sandpaper wrapped around a small block of wood. Provided there is no access from endure, drill minor holes inside the damaged area, then involve lenghty self-tapping screws half expedient wound up into the holes. Lock onto the screws using a couple of vice grip pliers and pull the damage area.2. Sand the affected area.
After applying the primer, if there are any bad spots standing out that you want to fix apply more filler repeating steps 4 and 5.
7. Drive the car inside your garage or make sure the outside temperature is warm, dry and the wind is not blowing.
8. Mask off the trim, handles or other parts of the body close to the affected area using masking tape and newspaper to protect them from spray paint.
9. Apply several thin layers of primer to the repaired area following the manufacturer instructions. Sand the primer with 600 grit sandpaper until the surface is smooth.
10. Apply thin layers of the desired paint on the repaired area following the product manufacturer instructions reaching up to two inches into the good surrounding area until a thick layer is achieved. Allow the paint to settle.
11. Apply a fine rubbing compound to blend the new paint with the original paint and work a coat of wax to finish the job.
