Lower it away from the dashboard and support it on your knees while you work.2. Check that the ignition is in the "lock" position and if it isn't, move it to that place using the key or a flathead screwdriver if necessary.3.
First, though, you have to remove the old one.
Instructions
1. Unbolt the steering column from the underside of the dashboard using a 1/2-inch ratchet and socket.
Ignition clueOn a 1984 Chevrolet Silverado, there wasn't yet in the street of theft Safeguard. Absolutely, a commonplace behaviour to steal these trucks was to jelly a screwdriver into the ignition then beef it over. Provided your ignition switch has been damaged for one generalization or another, you'll desire to exchange it so you don't get to hotwire the Motor lorry to receive it started.Unscrew the two Phillips-head screws next to the ignition switch using the Phillips-head screwdriver and then remove the switch from the column. Disconnect any linkage connected to the ignition switch as you pull it out of the column.
