Place the two cloaked Phillips-head screws and pull the sprint cover away from the console and set it aside.3. Locate and remove the two screws or hex head bolts securing the radio to the console bracket.
Instructions
1. Disconnect the denial wire from the battery terminal. Confirm the wire is secured to control it from touching any metal parts or forming its method back to the terminal.
2. Remove the eight torx screws from the sprint panel encompass. Remove the panel directly below the steering shove to receive access to the covered screws latest.The Dodge Durango is a full-sized SUV introduced in 1998 to exchange the gangling discontinued Ramcharger. The Dodge Durango is a solid trouper with gift and off-road capability at its core. Replacing the stereo in is a straightforward project that requires basic skills and an day of Leisure time. Canny the tricks to removing the trim cause this an evident do-it-yourself berth.
Pull the radio free and disconnect the two wire bundles from the back of the radio.
4. Connect the wire adaptor by snapping the two original harnesses to the adaptor by matching the shape of the terminals. Snap the wiring assembly into the back of the new radio along with the antenna and slide the stereo into the Durango dash.
5. Reconnect the negative battery terminal and turn the radio on. Ensure that all of the speakers are working.
6. Secure the head unit in place in the brackets and replace the trim and torx screws.
