A Motor lorry Bedstead can be compacted to repair whether there are enormous dents or damage to a excessive existence. Normally a hammer and protest dolly won't drudge on most of the Bedstead through you can't influence to the back side of the Bedstead panel. Oppose shops charge many hours of labour to repair or convert a Motor lorry Bedstead owing to of the labour involved. Save yourself mode and be taught repair or interchange a Motor lorry Bedstead.
Instructions
Repair a Truck Bed
1. Drill a gap in the centre of any dents. Embrace the dent puller and pull the dent elsewhere. Call the dent puller and the thing hammer on the metal until the dent is as smooth as likely.
2. Grind the gloss in and encircling the dent. Grind down to the emulsion so that the Bondo can stick to the metal.
An air ratchet is needed because the bolts are very hard to remove; a hand tool is not strong enough.8. Gather three other people to help remove the bed. Truck beds are very heavy and will require at least one adult at each corner.
4. Sand the Bondo until it is smooth and even with the painted surface surrounding the dent. Use 36 grit sand paper and a sanding block.
5. Apply the body filler over the Bondo until all of the Bondo is covered. Allow the filler to dry.
6. Use the 80 grit sandpaper to sand the body filler until it is smooth and even with the painted surface surrounding the dent. Now use the 120 grit paper to make the filler even smoother and ready to be primed and painted.
Replace a Truck Bed
7. Get under the truck bed to locate and remove the large bolts that hold the bed to the frame of the truck. There should be one or two bolts in each corner of the truck on the underside.3. Employ the Bondo to the all-inclusive dent. Smooth it with the plastic squeegee as you utilize, nevertheless cook sure the Bondo is higher than the metal surface surrounding the dent. Allow the Bondo to dry completely.
Lift the bed up over the frame and walk towards the back of the truck to remove the bed.
9. Sit the truck bed on top of two large sawhorses. The bed can then be repaired or hauled off without as much effort.
