Provided you sign that your 1998 Ford Explorer sounds louder than typical, it could be the muffler, which is constituent of the vehicle's exhaust transaction. The muffler has two assorted jobs. The fundamental is to decrease cacophony make-believe by the engine, and the moment is to expel engine gases latest the vehicle. Wear and tear and rust are two banal reasons a muffler might demand to be replaced. Replacing a muffler is a relatively Unceremoniously business that can be done in a short amplitude of extent.
Instructions
Removing the Muffler
9. Position the right-hand torsion bar and reinstall the nut and hanger.10.
Loosen the exhaust clamp.
3. Disconnect the right-hand torsion bar link. Remove the kernel and position the torsion bar link absent of the design.
4. Pull the rear block side outside of the rubber insulator. Pull the double support slides out from the insulators.
5. Twist the muffler while sliding it toward the rear of the vehicle and over the rear axle until you have removed it.
Installing the Muffler
6. Guide the muffler over the rear axle and twist it into position.
7. Apply lubricant to the support slides.
8. Push the double support slides and the rear support slide into the rubber insulators.
1. Elevate the rear objective of the vehicle and collar it with jack stands.2. Loosen and remove the two spring bolts securing the muffler.
Install and tighten the two spring bolts and tighten the clamp. Raise the Explorer above the jack stands. Remove the stands and lower the vehicle to the ground.
