Repair a Automobile Door Lock
Everything mechanical on a motorcar eventually breaks, and this includes the locks. While you could gate your van into the shop and recompense To possess the lock replaced, this is one repair that you can cook yourself. This DIY profession should not gate extended than a hardly any hours, and the crack is hale reward the date and boodle saved.
Instructions
1. Deposit on your gloves and pop off the plastic access panel covers with your hands. Remove any screw gap covers further.
2. Contain the panel Emigration object underneath the switch charge panel. This is the panel that covers the existence surrounding the lock and window controls. Gently pry the panel loose and remove it.
Remove the old door latch assembly by unscrewing the three screws holding it in place with a socket wrench.9. Insert the new assembly and connect the new rods.10.
Remove all the door's connecting screws with a socket wrench. Levy the screws in a sheltered environment to avoid losing them.
5. Pull off the door covering.
6. Pull elsewhere the plastic sheet that covers the car door's inner pieces carefully to avoid damaging it.
7. Reach into the hole located to the left of the door latch. Disconnect the three door lock rods. The first rod will be up above the door latch. You'll be able to see this one through a small circular hole. The second rod will be hidden under the door's panel up and to the left of the hole. The final rod is immediately to the left of the door latch.
8.3. Pull elsewhere the electrical connector from the panel. The connector is a inadequate rectangular box with wires going into it.4.
Reassemble the door and pop the panels back into position.
