You may committal to remove the starter Engine from you Chevy pickup provided it is grinding or dragging, in codification to catechism it. The starter motor is located on the passenger side of the Motor lorry, directly below the engine block at the back of the engine. Contemporary starter motors are available from most Car parts stores; whether you remove your starter first off, the auto parts store Testament ofttimes bench crack your starter for chargeless to aid you drive if it is pathetic.
Instructions
1. Ajar the hood of your Chevy and establish the battery. Remove the contrary battery cable from the battery after loosening the adaption bolt on the battery cable butt end with a wrench.
2. These are the starter retaining bolts. Remove the retaining bolts with a socket and ratchet.5.
Locate the starter on the passenger side of the engine, then find the two electrical connectors on the rear of the starter solenoid on the top of the starter. Remove the two nuts securing the connectors to the solenoid, using a socket and ratchet; then push the wires aside.
4. Move to the front of the starter and locate the two large bolts that run through the starter from the bottom and into the engine block. Hoist the front of the Motor lorry with a jack so you can comfortably drudgery under it. Position a place of jack stands under the frame rails of the truck, then lower the jack so the truck is resting on the jack stands.3.
Carefully lower the starter motor down from the engine compartment. Remove the starter from under the truck.
