Installing a allot of revolve spacers on your automobile can edit the stance of the vehivle, grant you to capitalization wider tires and yet avow you to employment a spin that may not accept been intended for your van. There are assorted types of spacers available, nevertheless the most typical are machined aluminium adapters that insert four or five holes to slide over the spin studs and then hog four or five original rotate studs locate into them for installing the shove.
Instructions
1. Jack up the vehicle and secure it on a locate of jack stands. Constitute positive that the stands are allot on solid ground that Testament not shift or sink while you are working under the trundle wells.
2. Remove the trundle and tire from the vehicle. Save the lug nuts so that you can reuse them when you reinstall the rotate.
3. Handle a coat of anti-seize compound to the turn studs before installing the spacer. This Testament confess for easier Emigration of the spacers should the extremity occur in the likely.
4. Slide the wheel spacer over the wheel studs so that the spacer fits flat against the brake drum or wheel hub. Install the new lug nuts that came with the spacers on the wheel studs and carefully tighten them. The wheel spacer should have a bevel or reverse cone shape to the base of the holes where the studs come through it.
5.7. Torque the nuts to the specifications from the manufacturer of the spacer with a torque wrench and socket. If there are no specs from the manufacturer, use the torque specs from the vehicle manufacturer for the wheels.8.
Tighten the nuts evenly using a crisscross pattern allowing the nuts to center the spacers as they tighten into the cone. The spacer should center as you go. If it isn't centering, loosen the nuts slightly so you can shift it as you tighten the nuts.6. Turn the hub or drum and watch the spacer to see that it is running true is not wobbling. The spacers can now be tightened completely.
Reinstall the wheel on the new wheel studs in the spacers and torque the lug nuts to the required specifications. Turn the wheel and be sure everything clears and it runs true around the axis.
