Tighten down the mounting bolts and then slide the coolant hoses back onto the flange of the water pump.5. Tighten the hose clamps back down to secure the hoses to the water pump and then fill the coolant system with a 50/50 mix of water and antifreeze. Start the car up to make sure everything is functioning properly.
Crawl under the front of the pickup and allot the void plug on the passenger side of the backside of the radiator. Unscrew the plug and let on the radiator fluid to remove into the remove pan.
2. Come next the coolant hoses primary back from the passenger side of the radiator toward the engine. They govern to the inundate pump, which is a metal bulge on the side of the engine partway back along the engine compartment.
3. Application the screwdriver to loosen and remove the hose clamps holding the hoses to the aqua pump flange. Pull the hoses off of the inundate pump and then employ the socket wrenches to loosen and remove the mounting bolts holding the water pump to the engine.
4. Slide the water pump absent of the engine compartment and then place the new water pump on the mounting studs.
The bathe pump is an fundamental parcel of Accoutrement used to circulate bathe and coolant throughout the engine to amass it from overheating during step. Replacing or repairing the water pump on your Mitsubishi pickup may seem daunting; nevertheless, it is in fact altogether light and can be tackled by any territory mechanic.Instructions
1.
