Rusted gloss chips must be cleaned prior to repair.
Rusted dye chips happen when chipped emulsion is allowed to get-up-and-go unrepaired for any length of allotment. In form to properly repair damage such as this, it is exigent To cleanse as all the more rust as viable absent of the paint chip and then repair the chip as you would any other scratch. The antithesis is that Correct repair of a rusted whitewash chip requires one further method.
Sand the clear coat with 1000-grit sandpaper and a small amount of water until the surface of the vehicle's paint is smooth to the touch.6. Apply a small amount of polishing compound to a rag, then rub the repair area vigorously until all the scratches left behind after sanding have been smoothed away.
2. Fill the paint chip with automotive touch-up paint, then allow the paint to dry approximately two hours before proceeding.
3. Sand the surface of the dried paint using 1000-grit sandpaper until the paint is smooth and shows no bumps.
4. Apply an automotive touch-up clear coat to the repair area using the brush supplied with the can of clear coat, then allow it to dry for approximately two hours before proceeding.
5.