Patina, a discolouration that develops on copper or bronze over generation, is an facile visual backlash to accomplish with a sporadic contrastive gloss colours. You can gloss a patina on walls, furniture or furniture hardware for an aged corollary. The blended colours extremely wear husky, hiding dirt and fingerprints while adding an gracefulness to any extension. You can emulate a blue-green copper patina, too common as verdigris, with a faux-finish using a sponge and water-based latex gloss.
Instructions
1. Disinfected the surface you are picture. Make sure it is handout from dust, grease and fingerprints. It should be completely dry before infancy the picture mechanism.
2. Manipulate the primer to the surface you are depiciton in yet strokes painted in the equivalent progression using a soft brush. The primer can be ghastly or unclouded. Concede to dry completely.
3. Emulsion the base color onto your surface. A flush brown or blackish bronze distemper should incorporate the comprehensive universe as a solid colour. Concede this layer of emulsion to dry completely.
4. Yawning one of the containers of turquoise whitewash and stir it husky.
5. Dampen a rag with a little bit of water. Keep a dry rag and a wet rag near you during the entire painting process to help blend out the edges of the turquoise and metallic paints. They must be blended while they are wet.
6. Dip a sponge into the bucket of water and squeeze out the excess water. Dip the sponge into the turquoise paint and tap out any large paint blobs back into the bucket.
7. Sponge the turquoise paint onto the dark brown base paint. Use as much or as little as you prefer. Use a wet rag to help remove paint, or use a dry rag to blend the edges.
8. Repeat the process with the second color of turquoise paint. Make sure To admit some of your base brown color to show through.10.
Repeat the sponging process until your wall is covered, allowing some of the brown paint to be seen through the turquoise. Make sure to create an uneven looking pattern so it is a believable patina. Refer to images of patinas on the Internet if you need some inspiration.9. Allow the first layer of turquoise paint to dry.
Sponge the base color brown onto any areas that need to be "opened up" if the turquoise is too thick. Allow this to dry before proceeding to the next step.
11. Sponge on the metallic gold or bronze paint. Use as much as you like to create a shimmery appearance. During the painting process, step back to Stare at the overall surface to see if you need more or less metallic paint.
12. Dry the wall overnight. Open a window or put a fan on it to help dry the paint in preparation for a clear coat. A clear coat is not necessary for walls, but is recommended for furniture.
13. Paint the clear coat on your surface in even strokes using a brush. One coat should complete the job.
