4. Remove the brake line by disconnecting the bolts with two line wrenches. There should be two bolts on each connector.5.
1. Put elsewhere the all-inclusive replacement brake edge instruments for your base year Concur. Differentiate Everyone abbreviate and which mark of the motorcar it goes to. Peruse over all directions that come with the kit.
2. Lift the car on jack stands and remove the first wheel.
3. Study the brake line from the hose to the last section connected by bolts. Bend the replacement line in the same way.
The brake line in a Honda Accord, or any other vehicle, is a entangled cylinder manner that sends the brake fluid from the skilled cylinder to the calipers on the circle. Replacing the inventory pipes later to the wheels with stainless steel ones is a calling you may be able to arrange yourself. The mode may be slightly differential provided your vehivle has anti-lock brakes.
Instructions
Install the replacement line. Attach the bolts by hand first, then tighten them with the line wrenches.
6. Bleed the brake system to remove air from it. Open the bleeder valve on the caliper and connect it to a container of fluid with a vinyl tube. Have another person hold down on the pedal to purge the air.
7. Replace the wheel and move onto the next brake section. Refill the brake fluid reservoir and test the brakes after all lines are replaced. The reservoir on an Accord is in the rear corner of the driver's side and usually has a black cap.
