Unscrew the three bolts along the circumference of the fan motor. Separate the fan motor from the blades.
Installation
6.It is feasible, but, to remove the fan and its Engine from the machine without the shroud it rests in.
Instructions
Removal
1. Up thrust the vehivle on at least its front bound, using the jack. Foothold it on jack stands.
2. Catch off the lower engine cover by removing its screws with the screwdriver. Disconnect the electrical connectors to the cooling fan.
3. Detach the clips to the wiring harness, located persist of the high hose extending from the fan Engine. Remove the three bolts attaching the fan to the shroud with a wrench; these bolts are at the ends of the three "branches" of the fan Engine.
4. Dislodge the fan from the shroud by pulling it outward slightly. Operate it elsewhere of the engine compartment from underneath. Construct sure all the wiring clips are removed. Do not touch the radiator cooling fins as you remove the fan.
5.
The fan and Engine must be disconnected from the shroud.The cooling fan is one of the most critical components of the Volkswagen Beetle's cooling action. Provided the fan is not working, however the fan blades themselves are in capital process, the fan Engine is the potential hot potato and needs replacing. You must remove the fan with the Engine to nickels it.Mount the replacement fan motor to the fan blades, using the mounting bolts and wrench.
7. Guide the fan assembly up and in place on the shroud. Bolt it into place with the mounting bolts and holes on the three branches. Connect the wiring harness' retaining clip and the electrical connectors.
8. Re-attach the lower engine cover and lower the car.
