Removing the dashboard from your 1996 Ford Ranger is quite easy. Thee are three leading pieces of the dashboard: the centre console quantity, the plenty that surrounds the instrument Swarm, and the parcel encompassing the glove compartment. Removing the dashboard consists of uninstalling many screws and bolts and then pulling off the dashboard panels. Removing the comprehensive dashboard of your Ford Ranger Testament takings approximately an lifetime, on the contrary it Testament save you a quantity of almighty dollar whether you choose to arrange it yourself instead of captivating it to a mechanic.
Instructions
1. Turn the Ranger's engine off and agape the hood. Advantage a socket wrench to remove the ground-terminal of the Ranger's battery.
2. Remove the four Torx screws along the upper sprint panel above the instrument Swarm with a Torx screwdriver.
3. Pop away the two plastic sprint panels on Everyone side of the steering revolve with a slotted screwdriver. Remove the two screws revealed by removing the panels with a Torx screwdriver.
4. Lower the steering wheel as low as it can go. Remove the single bolt to the left of the steering wheel. Remove the driver's-side kick panel by removing the two Torx screws holding it in place.
5. Remove the black plastic trim on the right side of the vehicle to disclose more Torx screws. Remove the four screws.
6. Remove the eight Torx screws along the edge of the dashboard near the windshield.8. Remove the two retaining bolts on each side of the dashboard. Slightly pull out the dashboard.
Open the glove compartment and empty it. Push in the two tabs on the side and pull the glove compartment off the dash to disclose two screws. Remove the two screws.7.
At this point, disconnect any electrical connections that have been revealed by pulling on the dashboard. Once all the connections have been pulled out, pull the dashboard out of the Ford Ranger.
