2. Pry the rubber gasket down from the lip around the window with a straight screwdriver or small pry bar. Be careful not to pry on the glass or you will chip it or break it.3.
You Testament entail to job from the inside to push the glass gone. The glass will be removed from the out so having someone to grasp it or stable it for you on the elsewhere of the Jeep will make the job much easier.
Instructions
1. Remove the interior molding around the rear windows. You will need a screwdriver to remove the screws from the trim to expose the rubber window seal underneath.
Remove Jeep Cherokee Side WindowsRemoving the rear side windows on a Jeep Cherokee is genuine intelligible, nevertheless is even easier to cause whether you keep a moment workman to assist. The side window glass is not glued into the Jeep and removing it sole requires that you remove the seals and the glass in one action.
Apply light but even pressure to the edge of the glass while working the gasket down along the edge. Continue around the edge of the glass until it becomes free enough to slide out of the window opening.
4. Remove the glass from the opening on the outside of the Jeep and set it aside where it isn't going to receive broken. Gently pull the rubber gasket remainder of the Exit of the window opening.
