The hold on the tailgate of the Nissan Frontier, while muffled able and durable, is fictional from plastic. Damage to the handle assembly is not easily constant and, in most cases, Testament need the replacement of the abundant handgrip meeting. Access to the inner working and retaining hardware of the shaft meeting is washed-up an access subsume that you Testament acquisition in the centre of the inside of the tailgate. Turn the plastic clip, snapping it off the latch rod. Lift the rod out of the hole in the center of the clip, leaving the clip in place. Lay the rod aside.3.
Frank the tailgate of your Nissan and fix the access plate in the centre of the tailgate. Remove the two access screws from the insert with a Phillips screwdriver and lift the access incorporate off, setting it aside for reuse following.
2. Locate the latch rod just inside the opening. Emigration and replacement of the filled meeting can be accomplished in conscientious a uncommon minutes with handwriting tools Homewards in your garage.
Instructions
1.Remove the two retaining nuts on the studs just inside the access hole with a socket and ratchet. Remove the handle assemble from the opposite side of the tailgate.
4. Install a new handle assembly into the access hole, install the two retaining nut and tighten them with a socket and ratchet. Do not over tighten the nuts or you will damage the handle assembly. Push the latch rod into the hole in the center of the plastic retaining clip. Turn it until it snaps onto the rod.
5. Install the access cover onto the tailgate and insert the two retaining screws. Tighten the screws with a Phillips screwdriver. Close the tailgate and open it again to be sure the latch and handle are functioning properly.
