Anyone that has a nectareous computer agnate a Vet, knows every inch of his vehicle. Once you mind a broken stud, you require to convert the stud on your Corvette as soon as practicable to avoid also damage. Whether you posses a embryonic mechanical influence, the equitable tools and some energy in your arms and hands, you can discharge the venture.
Instructions
1. Buy a dewy stud. Whether you aren't decided of the extent that you commitment for your Corvette, wait until you remove the stud and part it with you.
2. End jack stands to stand your Corvette. The newer models don't still come with jacks. Utilize jack stands to occupation the vet. Everyone representation and owner has her own determinate mode to lift the Corvette.
3. Remove the turn once your car is jacked up. In the newer models, you have both front and back disc brakes. Remove the caliper and hang it from mechanics wire so there's no pressure on the line. Mark the rotor to match the studs and remove it. On the older models, take off the drum.
4. Find an opening that allows easy removal of the stud from the back. If you can't find one, then you have to take off the hub and put it in a vise.
5.7. Take off the bolts and put the parts back on that you took off to replace the wheel stud on your Corvette. Put on the wheel and tighten down the wheel nuts.
6. Tighten down the wheel bolt with an impact wrench if you have one. This pulls the stud through the hub. Add more bolts as necessary until the head of the stud seats against the back of the hub.
Smack the stud with a mallet and push it out the back of the hub. Replace the stud with a new one. It takes quite a bit of effort to receive enough threads through the hole to put on a wheel bolt. It's easier if you put the new stud in the freezer for several hours.
