Add-on silencers remark To possess no detrimental development on engine performance, and they could be expanded cost-effective. Install a Benz Silent Rider to soundless your Polaris Ranger RZR equipped with a rear brush guard.
Instructions
1.Muffler SilencerConstruct your Polaris RZR race quieter by installing an aftermarket muffler or adding a silencer to the existing muffler. Engine performance may convalesce by replacing your existing muffler with a Mega Faculty Silencer by Aaen Performance although the expenditure may exceed some budgets.Install the Benz Silent Rider silencer by fundamental removing the bolt from the backside of the mill tail-pipe. This bolt holds the Glimmer arrestor in put and Testament no longer be needed. Remove the Glimmer arrestor from the tail tube provided it is loose. Whether not, leave it in place.
2. Slide the silencer onto the factory tailpipe. The hangers on the silencer will line up with the cross-bar of the rear brush guard. Mark the places where holes will be drilled in the bottom of the cross-bar. Remove the silencer and drill the holes.
3. Reposition the silencer with the hanger holes lined up with the newly drilled ones. Install the bolts provided with the silencer and tighten them.
