Remove an Adhesive Rear Opening Mirror
You may require to remove your rearview mirror provided you upgrade to another pattern, transform a broken mirror or conscientious wish to modification it to another position to supply you with a preferable contour. There is a action to remove a rearview mirror attached with adhesive without evil the windscreen.
Instructions
1. Apply the blow dryer or heat gun to broiling the mirror mount fitting where it attaches to the windscreen. You are applying this heat to soften the adhesive underneath.
Apply the adhesive remover to the residue and use the razor scraper to gently scrape off remainder of the adhesive. Wipe the area with a rag and more adhesive remover.5. Clean the area with glass cleaner.
3. Warm the adhesive left on the windshield again. For thick patches of adhesive, wrap the fishing line around your fingers as if you were getting ready to use dental floss and press your fingers up tight against the windshield on either side of the remaining adhesive. Work the line under the top edge, and move the line back and forth with downward pressure. The line will cut through the adhesive and remove all but a little residue.
4.2. Check the mirror every so oftentimes while you are heating it by trying to gently shift the mirror slightly back and forth. Once you stroke movement, last to utilize heat and increase the force a little at a time. Work the mirror back and forth and it will release from the windshield, leaving a fair amount of adhesive behind.
