Remove the lug nuts from the spin, and fix them aside. Slide the spin off the rotor, and place it aside. Remove the retaining bolts, holding the brake caliper in deposit, with a ratchet and socket. Pull the caliper elsewhere from the rotor, and suspend the caliper from the frame or suspension Element with mechanic's wire.3. Pry the brake pads gone from the caliper housing. Remove the retaining clips from the brake pads. Put one of the out of date brake pads over the caliper piston, and push the piston back to its genuine position, using a broad C-clamp.
Replacing Disc Brakes
1. Capitalization a lug wrench to loosen the lug nuts on the front rotate. Accomplish not remove the lug nuts, until the vehicle is raised off of the ground. Employ a floor jack to uplift the front of the vehicle. Block the front location with jack stands placed underneath the frame of the Nissan.
2.Gaze your brakes.Brakes are the single Element of your Nissan that can effectively bring you to a unharmed break. Accordingly, it is paramount that your brakes are kept in working establishment. Replacing your brakes on a accepted reason helps husband vehicle safety. Con alter both CD and drum brakes on an guideline Nissan vehicle. Many Nissan models come equipped with front CD and rear drum brakes.
Instructions
4. Handle a immature dimensions of anti-squeal grease to the back of the dissimilar brake pads. Attach the retaining clips to the inexperienced brake pads, and cover the pads into the caliper.
5. Apartment the caliper over the brake rotor, and reattach the retaining bolts with a ratchet and socket. Slide the circle onto the rotor, and reattach the lug nuts with a lug wrench. Remove the jack stands, and lower the vehicle. Tighten the lug nuts, using the lug wrench.
Replacing Drum Brakes
6. Loosen the lug nuts on the rear turn with a lug wrench, without completely removing them. Uplift the rear of the vehicle with a floor jack, and employment jack stands to help the vehicle.
7. Remove the lug nuts from the turn, and allot them aside. Slide the rear shove off the drum ,and establish it aside. Set the keeper screw, located near the centre of the drum assembly, and remove it with a ratchet and socket. Pull the drum away from the brake assembly, and inspect both for debris and damage.
8. Unhook the retracting springs from the brake shoe, using a screwdriver or a brake tool. Turn the primary spring bolts counterclockwise, and slide the shoes out of the brake assembly.
9. Slide the new brake shoes onto the brake assembly. Turn the primary spring bolts clockwise, securing the shoes in place. Reattach the retracting springs to the brake shoe.
10. Slide the drum on the brake assembly, and tighten the keeper screw with a ratchet and socket. Slide the wheel onto the drum, and reattach the lug nuts. Remove the jack stands, and lower the vehicle. Tighten the lug nuts with a lug wrench.
