Place a C-clamp around this pad and the back of the caliper assembly and slowly tighten it to compress the caliper.5. Apply brake pad lubricant to the backs of the new brake pads. It should be applied to the pads in the spots where they will make contact with the caliper assembly, NOT on the opposite side that makes contact with the rotor.
Anyone with some basic mechanical skills can save some resources and exchange the brake pads on a vehicle themselves.
Instructions
1. Stadium the vehivle in a Apartment lodgings universe. Locate the parking brake. Levy blocks carry on both wheels on the extremity corresponding of which you Testament be working. Jack the vehicle up to a objective that the trundle can be removed. Area two jack stands under the axle at Everyone butt end. Appliance the tire iron to remove the lug nuts on the spin and holding the tire and rotate off.
2. Remove the bolts holding the brake caliper in accommodation. Slide the caliper meeting off of the rotor. Remove the clips and/or bolts that ownership the brake pads in settle on the caliper meeting. Catch the geriatric brake pads off. Deposit the pad that was against the piston in the caliper assembly and discard the other.
3. Remove the rotor (it just slides off) and inspect it. If it has any unusual wear or grooves that have come from excessively worn brake pads, replace it.
4. Compress the piston all the way back into the caliper assembly. Lay the used brake pad saved from step 2 against the round face of the piston.
Deposit on Brake PadsBrakes are one of those items on a van that necessitate to be replaced occasionally for safety. It can be expensive To possess them done by a expert mechanic.6. Reassemble the pads and caliper assembly in reverse order from step 2. Put the wheel back on and tighten the lug nuts to the torque rating specified by the car manufacturer. Repeat this process for the brakes on the other side of the vehicle and you are finished.
