Friday, May 29, 2015

Remove Calipers On The 2001 Ford Expedition

A twosome of brake calipers.


The brake calipers on a 2001 Ford Expedition elbow grease in conjunction with the brake rotor and pads to slow the vehicle when the Chauffeur presses the brake pedal. Over age the seals inside the caliper can leak, which Testament arrangement in malicious brake performance. Moreover, the piston inside the caliper could stick inside the Muzzle, causing the brakes to hang up. Rapid the clamp to propel the piston into the caliper.7. Berth a misspend oil crowd pan underneath the brake caliper.8.



Removing the Wheels


1. Free the 2001 Ford Expedition's hood. Unhook the ground cable from the colorless battery publish by loosening the retaining bolt, using a wrench, then twisting the clamp off the terminal.


2. Siphon the brake fluid from the crack cylinder reservoir, using an gray turkey baster. Never apply the turkey baster for diet again.


3. Loosen on the other hand accomplish not remove the lug nuts on the Expedition's front wheels, using a lug wrench.


4. Up thrust the front of the Expedition using an automotive jack. Base with jack stands placed underneath the front frame.


5. Remove the lug nuts you loosened earlier and pull the front wheels off the lug studs, using you hands. Place the wheels and lug nuts elsewhere of the plan.


Removing the Caliper


6. Position the C-clamp over the brake caliper, with the backside of the clamp on the inboard side of the caliper and the top of the clamp on the back of the outboard brake pad. Removing the calipers on a 2001 Ford Expedition can be accomplished by the familiar mechanic. All you devoir are a uncommon no problem tools.

Instructions



Unscrew the banjo bolt that connects the rubber hydraulic contour to the brake caliper, using a socket. Pull the string away from the caliper. Be aware that brake fluid may leak out at this point.


9. Unscrew the two bolts that connect the brake caliper to the steering knuckle, using a socket.


10. Lift the caliper up and away from the brake rotor with your hands. Then remove it from the vehicles.