The system of removing the door panel in a GMC pickup is usual for 1995 to 1999 models. The GMC interior was considerably redesigned in 1995, including the door panels. Because the GMC shares its components with its Chevrolet counterpart, the step and applies to Chevrolet trucks in the twin year reach. You'll committal a scarce facile tools and approximately 20 minutes to remove the door panel.
Instructions
1. Elevate the window fully and unhook the ground (nigrescent) battery cable. Provided your GMC is not equipped with power windows and locks, you act not devoir to unhook the cable.
2. Remove the window haft. Pry the upper edge of the plastic panel attached to the interior part of you sideview mirror. Pull the panel off.6. Insert the door panel tool between the panel and the door skin.
Pull the plastic panel surrounding the door shaft toward you. Include a small screwdriver into the upper-center portion of it to disengage the clip. Remove the panel and set it aside.
4. Remove the two Phillips screws from the armrest pull. Slide the armrest back to remove it from the door panel.
5. Contain the window grip pry underneath the practice; push in to remove the clip. Slide the hilt off and detain the clip for reinstallation. Provided your Motor lorry has competency windows and locks, pull the determination panel off the door panel; unplug it and locate it aside.3.
Move the tool around until you feel the clips. There are eight clips; two on the rear, three on the bottom and three on the front. Push the tool back to disengage the clips.
7. Push up on the door panel to unhook the lock rod. Hold the panel on both sides and pull it away.
