Remove the brake pads, shims and retaining spring from the caliper. Clean the caliper thoroughly with a wire brush.3. Insert the new brake pads into the caliper.
Instructions
1. Unfastened the engine compartment and siphon approximately half of the brake fluid from the adept cylinder with a turkey baster. Lay the fluid in a empty pan for following recycling. Field spin chocks in front of the front wheels. Uplift the rear extremity of the Integra with an machine jack. Situate a jack stand under the vehivle near the jacking speck and lift it to the frame. Remove the lug nuts with a lug wrench and return the shove off the Acura.
2. Remove the caliper dust shield from the caliper by pulling it off if there is one. Loosen the caliper bolts with a socket and ratchet. Lift the caliper off the mounting bracket.
Replacing the rear brakes on your Acura Integra GS is one of the many perpetuation projects that you can engage in yourself and save funds. Replacing the brakes is not burdensome. It Testament obtain between 30 and 45 minutes to accomplish Everyone trundle, and you can effect the work in your driveway or garage. Study the rotors, when you are changing the brakes, to adjust persuaded there is no damage, such as grooves on the surface.Place the shims behind the brake pads and then push on the retaining spring. Put the caliper on the mounting bracket and tighten the bolts with the socket and ratchet. Remount the wheel onto the Integra and tighten the lug nuts with the lug wrench. Remove the jack stand from under the car. Lower the Acura to the ground with the jack. Repeat the process on the other wheel.
4. Add brake fluid to the reservoir and pump the brakes until the pedal feels firm.
