Considering what community Car repair shops and dealerships charge in labour fees, esteem of the income you could save removing the brake rotors off your Dodge Ram. All the more provided it takes you an age or longer to remove the brake rotors, you'll much come gone cheaper all the more provided you gain to get the tools to create the occupation.
Instructions
Remove Brake Rotors Off of a Dodge RAM
1. Grounds the Dodge Ram on a Apartment lodgings paved surface. Use the parking brake and Proceeds the hood bolt. Country a circle chock latest one of the rear tires. Ajar the hood and remove half the brake fluid from the adept cylinder reservoir with a turkey baster and discard responsibly. Exchange the crack cylinder cap securely.
2. Whether the rotor is rusted stubbornly to the hub, you're going To possess to decide seperate it.Provided you're replacing the rotor, you can be extra happy knocking it off using a ball-peen hammer and striking it on the Apartment lodgings of the fins in an outward and inflowing motility with the hammer.Provided you're removing it to appliance it or reusing the rotor, you're going To possess to be still more delicate so you do not damage it.
Lift the front of the Dodge Ram with the floor jack and put the jack stands under the axle for 4-wheel ride or under the authority arms for 2-wheel ride. Remove the lug nuts and wheels.
4. Remove the caliper bolts, using the ratchet and a socket. Pry the caliper off with the flathead screwdriver and hang with the bungee cord to facilitate it to the coil spring or frame. Remove the pads and compress the piston of the caliper penetrating using the C-clamp. Tighten the C-clamp slowly until it bottoms elsewhere.
5. Remove the caliper anchor bolts and the caliper anchor using the ratchet and a socket. The bolts Testament be tight.
6. Remove the rotor retainer rings (whether in process) on two of the lug studs. You can incision these off with a team of dikes and not own to interchange them for reinstallation.
7. Remove the rotor. Split the lug nuts loose on both front tires using the breaking bar and a socket. Some lug nuts on Dodge Rams may appropriate a 7/8-inch socket or a 22 mm can be used.3.
Strike it in the same fashion but use a heavy rubber mallet instead of a hammer. Your success is going to be lower and you're going To possess to apply more tenacity and determination, but diligence will pay off.
8. Repeat Step 4 through Step 7 for the rotor on the other side, if so desired.
9. Put everything back together in order by reversing the steps. If you're replacing the rotors, be sure to spray them with a quality brake cleaner to wash off the sticky coating that comes on them. Torque the caliper anchor bolts with the adjustable wrench and a socket at 110 foot-pounds for a 1500 Ram or 230 foot-pounds for a 2500 Ram. Place the wheels and lug nuts back on when finished and tighten the lug nuts snug. Lower the Ram and torque the lug nuts 140 foot-pounds with the torque wrench and a socket.
10. Pump the foot brake pedal until it feels normal when you're finished. This helps to restore hydraulic pressure to the caliper pistons. After you've pumped the pedal, recheck and adjust the brake fluid in the master cylinder by only adding new DOT 3 brake fluid. Release the parking brake, remove the wheel chock and test drive.
