The Ford Mustang is a muscle motorcar that has been in Industry thanks to 1964. The Mustang has a tremendous aftermarket succeeding with literally thousands of upgrades available. One accepted and quite clean upgrade is to alternate the pedals with aftermarket alternatives. There are a Broad conglomeration of such pedals available for the Mustang, including so-called Bullitt-style pedals, which act a distinctive brushed aluminium Stop to match other Bullitt-style interior components. Installing them is a two-step manner, consisting of removing the inventory pedal covers and installing the Bullitt-style covers.
Instructions
1. Remove the plant brake and pedal covers by pulling the contour of the involve from endure the pedals themselves.
2. Remove the dead pedal by prying it loose with a doozer screwdriver.
3. Remove the accelerator pedal by loosening the two bolts holding it in levy with an adjustable wrench.
4. Detach the throttle cable, located underneath the accelerator pedal, by simply pulling it down.
Slide the Bullitt brake pedal involve over the pedal itself. Job the embrace over the pedal in a Hand-bill motility to guard that the cover is fully in place.7. Remove the pin holding the accelerator pedal in the pedal assembly by lining up a nail with the pin and tapping on the nail with a hammer until the pin is dislodged.
5. Install the Bullitt dead pedal by simply urgent it down into berth where the works dead pedal was located.6.
8. Replace the stock accelerator pedal with the Bullitt accelerator pedal
9. Reinstall the accelerator pedal into the location it was previously removed from using a wrench and the same 2 bolts that held the stock pedal in place.
10. Reconnect the throttle cable to the accelerator pedal.
