You can remove the starter on the Ford Marquis Homewards in 25 minutes or less. The starter is bound for turning the engine's call gear connected to the flywheel to fix the engine in movement. Symptoms of a deficient starter can allow for the engine not starting at all or a blustering, repeated clicking or winding sound. On the 1996 Marquis, the starter is located on the passenger side underneath the machine where the engine and transmission come well-organized.
Instructions
Removal
1. Disclosed the hood on the Marquis and disconnect the balky battery cable from its advise with a socket wrench. Wrap the filled metal terminal purpose of the cable with electrical tape. As you deposit the cable down within the engine environment, be firm it's not in open contact with any other metal or the engine itself.
2. Stand the van at its jacking mark on the front passenger side with a vehivle jack. Slide a jack stand into position good correctly of the automobile jack. Lift the bedding arm on the jack stand to the heighth of the automobile jack. Come back the locking pin to the assist arm on the jack stand to secure its heighth.5. Remove the top retaining bolt on the starter. It will require the use of a flexible socket extension bar because of the cramped space. Support the starter with one hand and remove the bottom retaining bolt.
The comprehend should come off by labourer. If you have any trouble removing it, use a flat-head screwdriver to assist you.
4. Label each of the starter's wires clearly with white painter's tape before removing them. Use a socket wrench to loosen both of the nuts holding the power wires in place, then remove the nuts and wires by hand. On the 4.6-liter engine, the starter has a third wire that's a push-on connection. Remove the wire by gently pulling it off its connection.
Slightly rock the motorcar back and forth to guarantee that it's sturdy before sliding underneath it.3. Remove the cramped plastic embrace on the starter's function wires to access the retaining nuts underneath it. If you have a different engine other than the 4.9 liter, the starter may have a third retaining bolt. After removing the starter's retaining bolts, slowly lower the starter from its position on the engine. Install the starter by simply reversing this procedure exactly.
