Remove a 1998 Ford Contour Fuel Pump
The fuel pump on a 1998 Ford Contour transfers fuel between the fuel container and the fuel injection operation on the intake manifold. This is an salient activity, since the fuel injection process requires the fuel come into the transaction at a firm energy, otherwise it won't utility properly. Push in the tabs on the fuel lines and pull them off of the fuel pump.4. Place the brass drift on the ring that locks the fuel pump to the gas tank. Hammer the end of the drift with the hammer until the ring pops off of the fuel pump.
Disclosed the rear doors. Peep in the Joint between the seat cushions to boast the bolts holding the seat to the vehivle. Unbolt the backside seat cushion using the 3/8-inch ratchet and socket, then pull the cushion away of the system to disclose the fuel pump.
2. Pop the hood and locate the fuel injection rail on the top of the engine. Connect the fuel pressure gauge to the Schrader valve on the injection rail. Push the pressure relief valve on the gauge to release pressure in the system. Disconnect the fuel pressure gauge and reinstall the cap on the Schrader valve.
3. Take off the plastic cap around the fuel pump using your hands. Unplug the harnesses on the fuel pump using your hands. When the pump goes away, the machine won't be able to flow and you'll be stuck wherever you're parked. Happily, removing the fuel pump isn't indubitable burdensome, and the course can be done in approximately an generation.
Instructions
1.Lift the fuel pump up and out of the gas tank and allow it to drip dry before you pull it out of the car.
