Opening up the interior with a sunroof in a Hyundai Sonata extremely helps with ventilation and the overall ask of the motorcar. Installing a sunroof in a Hyundai Sonata requires removing a cross brace along with precision cutting skills and distinctive tools. The maximum dimensions sunroof for a Hyundai Sonata is a good 22 inches Broad and 34 inches elongated.
Instructions
1. Prepare the employment environment by laying away all of tools and parts, fascinating discomposure to constitute positive the sunroof container has all of the needed parts. Remove the front seats by unscrewing the four bolts under Everyone seat. Compass a page or tarp over the interior.
2. Berth the Screen tray on the interior of the roof and verify there is at least 4 inches of fair extension all the expedient all over. Poke a screwdriver completed the headliner and Small pit the roof metal slightly at Everyone corner.
3. Remove the headliner, support board and roof brace. Tape the template to the roof using the dimples as a guide. Replace the support board and headliner using a razor knife to make any alterations.
Smooth the metal edges with a file and test fit the sunroof on the Hyundai Sonata. Make adjustments if needed and cover the metal edges with primer. Clean the bottom of the sunroof and run a bead of sealant around the lip of the sunroof.
5. Set the sunroof frame in place and connect the clamping ring and screws, taking care not to tighten too much. Clean any excess sealant with a cloth or rag and assemble the rest of the sunroof. Make a hole at the point of one of the dimples to begin the metal shears. Cut out the roof panel, following the template exactly.4.
