The radiator in your Plymouth Voyager keeps the engine from overheating. Running your Voyager with a damaged or leaky radiator can eventually create expensive engine damage. Here's alternate the radiator in a 1996 to 2000 design Plymouth Voyager.
Instructions
1. Disconnect the negative battery cable before you proceed. Emptied the radiator withdraw plug and filter the coolant into a resealable container. Remove the air intake resonator from the air cleaner. Remove the overflow vat filler hose on the coolant recovery process and disconnect the fan electrical connector, which can be erect on the cooling fan module.
2. Remove the mounting screw from the crossmember on the coolant recovery development overflow receptacle and the upper radiator crossmember mounting screws.
3. Unhook the wiring connector on the engine block heater, provided relevant, and booty off the crossmember on the upper radiator. Remove the all-inclusive air cleaner and disconnect the transaxle cooler path. Remove the air conditioner condenser brackets reduce it from the radiator. Detach the grill time and lift the radiator carefully from the automobile. Be careful not to damage the fins when you lift it elsewhere.
Plug the ends. Disconnect the radiator hoses from the radiator, and remove the radiator hose clips from the cooling fan.4.
5. Install the current radiator, activity positive that the air seals are positioned properly. Lower the radiator into position.
6. Reinstall the engine components in the cast they were removed, fastening all nuts and bolts securely. Reconnect the detrimental battery cable.
7. Fill the system with a mixture of half antifreeze and half distilled water. Start the engine and let it warm up, then check the level and top it off, if necessary.
