Depiciton your vehivle gives it a original gun and can and mask barn door areas of protest damage. Nevertheless, it is a extensive chore that requires a group of extension and era. Whether you thirst for to close it true you own to both prime and stain it with the licence distemper. You engender by matching the colour with the one you yearning, and then choosing a coat, gloss, hi-gloss or mat. After that, you obligation to match your primer to the tint itself.
Instructions
1. Sand down you motorcar protest removing all rust, and exterior tint. Then fill and sand the cracks or repair any damage. Sand the bondo or filler.
2. Capture the apropos primer for your metal and stain. Cross-examine you salesperson for facilitate on this one.
3. Tape off all the chrome using painters tape or popular masking tape.
4. Tape off mirrors, and wind shield gaskets, then subsume each with sheets of paper, that is completely taped and sealed together.
5. Cover the wheels with paper completely. Be sure every inch of the car you don't want painted is covered, even the ender carriage, because paint will float, spatter and attach itself to the tiniest holes.
6. Load your primer in your spray gun and test it on a sheet of paper or plywood.
7. Paint the car using fast strokes and long bursts of primer. Resist the urge to make short quick bursts of spray, because this gives you bulky coverage that is prone to dripping.
8. Let dry, and then check your paint info to see if you should apply a second coat.
Apply the paint in very broad even strokes about medium speed, or just enough to cover the car in a decent but not too thick, coat. Pass over the car several times on the first coat.
10. Let each coat of primer dry. You can decide if you want to sand the primer. I wouldn't because it is a huge job and not always necessary.9. Load your top coat of paint after cleaning the gun.
