Reason kits nearly never come painted, leaving it to you to remuneration hundreds of dollars To possess someone dye it. Fresh protest kits are usually chargeless of blemishes, so no repair elbow grease is needed before delineation. This makes it easier to tint a entity tools yourself and save cabbage.
Instructions
1. Sand the entity equipment with 1,000-grit sandpaper to ready it for emulsion. This allows the paint to seize" better, creating less peeling later. Make sure to sand in crevices and around corners.
2. Clean the body kit with a wax and grease remover To cleanse everything from the surface.
3. Spray an even coat, being careful not to receive it too thick in any one area.5. Allow the primer to dry completely. Sand the entire kit again with 2,000-grit sandpaper to remove the "dusty" portion of the primer.
Set up the pieces of the body kit on stands such as saw horses so there is access to the underside of the kit. It can also be set on a clean tarp on the ground.4. Spray primer on the entire body kit.
Be careful not to sand completely through the primer.
6. Clean the body kit again with the wax and grease remover to remove surface debris.
7. Spray paint on the entire body kit, being careful to spray evenly. Avoid runs in the paint by spraying with slow, even strokes. Allow the paint to dry and then apply the clear coat.
