Scrape the glue compound completely off the windshield to clean the windshield. This is a simple project that will take you less than five minutes to complete.
Instructions
1. Wipe off the outer windshield using glass cleaner and a paper towel. Make sure that the windshield is completely clean and free of any and all debris.
2. Using the heat gun, heat up the windshield on the outside. Hold the heat gun eight to 12 inches away from the windshield. Set the heat gun on a low-medium heat and wave the heat gun across the area where the glue compound is in a side-to-side motion.
3. Using the razor blade, scrape the glue compound off the windshield and pull the rearview mirror mount off the windshield.
The rearview mirror mount is the group of metal endure the rearview mirror that is conected to the windscreen. The rearview mirrors on vehicles commonly rift or ripen into disconnected from the rearview mirror mount over lifetime. The rearview mirror mount is secured to the windscreen by a glue-like compound. The glue-like compound will need to be heated up before the rearview mirror mount can be removed from the windshield.
