The 1996 Audi A4 came equipped with a plant installed single-disc Disc player and AM/FM stereo. Optional stereo units included a multi-disc changer. A4 owners who disposition to upgrade their foundry decks or transform a malfunctioning inventory unit with a brand-new Disc player can cause so without preceding automobile audio training. The inventory stereo deck requires Commotion Emigration keys. The keys and the wiring harness adapter essential when connecting the advanced Disc player, can be purchased ended Audi or from an aftermarket retail machine audio Issue.
Instructions
1. Pull the hood Proceeds lever under the dashboard on the Chauffeur's side of the Audi. Step to the front of the A4.
2. Lift the hood to access the battery. Loosen the contrary battery cable clamp with a 10mm socket wrench. Remove the cable from the terminal and rest it gone from the battery. Transmit to the inside of the Audi.
3. Involve the extraction keys into the workshop stereo. The slits are located at the backside corners of the plant stereo face. Push the keys until they lock into assign.
4. Pull outward on the keys while pulling the factory stereo from the stereo dock in the Audi's dashboard.
5. Disconnect the stereo wiring and antenna cable from the back of the mill tendency unit.
6. Slide the installation sleeve included with the aftermarket Disc player into the vacant stereo dock inside the Audi's dashboard. Fold the metal tabs at the entrance of the sleeve downward with a Apartment lodgings screwdriver to secure the sleeve within the dock.
7. Tighten the cable's clamp with the wrench. Close the A4's hood.
Plug the antenna cable from the inside of the Audi stereo dock into the antenna outlet on the lower left corner of the new CD player's rear panel.
10. Slide the CD player into the A4's stereo dock (now lined with the installation sleeve). Push the new unit into the opening until it snaps into place within the sleeve. Return to the engine compartment.
11. Place the negative battery cable back around the Audi's negative battery terminal. Connect the wiring connectors from the Audi's stereo wiring into the leads of the wiring harness adapter.8. Plug the wiring adapter's bob connectors into the much the same outlets on the rear panel of the fresh Disc player.9.
