When you anticipate of a Jeep Wrangler, thoughts of off-road driving, crowded tires, administer air, no doors and soft top roofs come to brains. On the other hand, increasingly Wrangler owners longing to combine the Rough contemplation of a Jeep with the amenities and safety features offered by other automobiles, including sunroofs. Jeep hardtops immediately own a sunroof preference which provides a degree of safety, security and upgraded appearance without losing the impression and openness synonymous with a Jeep Wrangler. You can install the two-piece hardtop with a sunroof quite easily and be on your hang-up in no chronology.
Instructions
1. Shut off engine and unfastened the hood. Remove the negative battery cable and speedy the hood.
2. Remove the Jeep Wrangler soft top, whether requisite. Frank the Wrangler hardtop implements and verify that the manufacturer closed and taped down the window.
3. Extensive the rear tailgate and lower the rear shorten of the hardtop into the rear channels on the side of the Jeep. Take off the tape from the back window of the hardtop.6. Lift and lower the hardtop's front piece onto the front rails of the Wrangler.
Insert the six 5/18-inch bolts in the washers and put them into the bolt holes on the inside of the hardtop.
5. Position the tapping plates under each bolt and tighten the with the Phillips-head screwdriver. Lasting the tailgate to cause certain the hardtop is locate in the frame fair. Whether the tailgate does not close, remove the hardtop and realign it on the channels.4.
Get into the Jeep and clasp the latches connecting the front and rear pieces of the hardtop. Look up and make sure the sunroof is aligned and in place.
7. Apply the weatherstripping along the bottom edge of the rear section of the hardtop. Follow the line where the tailgate meets the new hardtop.
8. Open the hood and reattach the negative battery cable.
