Nearly all Acura Integra models came with a works sunroof, on the other hand for the unusual that didn't, installing an aftermarket sunroof Testament own the breeze in your hair quickly. Installing a sunroof in an Acura Integra takes different tools to abundant. A regular fist is and required along with a expert even of installation exposure. The largest sunroof available for the Acura Integra is 20 inches Broad and 32 inches expanded.
Instructions
1. Prepare the effort earth by laying outside the tools and checking to make certain all of the required parts came with the sunroof. Scrutinize the installation conductor carefully as the action can vary slightly between sunroofs.
2. Deposit a leaf over the interior for Safeguard and control the Screen tray up on the roof. Clinch there is at least four inches of unrestrained room in every order. Center the tray and mark the corners with a screwdriver. Push the screwdriver through the headliner and dimple the roof just enough to enable locating the position from outside.
3. Remove the headliner and any supporting board. Secure the template to the roof of the car with tape by lining up the dimples made earlier. Make a hole through the roof at the point of a dimple and cut out the roof with the metal shears by following the template carefully.
4. Make any necessary alterations to the headliner with a razor knife and set it back in place.
Run a bead of sealant around the inner lip of the sunroof and set it in place. Hook the clamping ring and screws to the frame being careful not to over tighten. Clean up any sealant that squeezed out. Smooth the metal edges with a file to limit leaking. Test fit the sunroof to ensure there is 4mm of clearance on each side. Apply metal primer around the edges of the opening.5.
