Mounting a 60 Hp Johnson outboard Engine on your boat is straightforward and quite little, and is yet less complicated than installing an inboard Engine. Here we Testament concentrate on install a Johnson 60 Hp outboard Engine on a usual 18-foot boat with an free stern that is locate up for the employ of an outboard Engine.
Instructions
1. Get a source for fuel. Portable marine gas tanks can be purchased at most boat dealerships or marine supply stores. They are usually constructed of heavy plastic. A hose and siphon pump should be purchased at the same time.
2. Scrutinize the directions related to fuel, fuel servicing and battery type as they employ specifically to the 60 Hp Johnson outboard motor before you proceed to the adjacent steps. The directions should come with the Engine. This is essential not one for safety, on the contrary as well to arrange you create not damage your engine. Whether you bring about not do things right, your motor may perform poorly or not work at all.
3. Supply the motor with an electrical source using a deep cycle marine battery. The process is somewhat similar to attaching battery cables to your car battery. Connect positive to positive and negative to negative per the instructions that came with your Johnson boat motor. Secure the battery as near to the motor in the stern as you can, and preferably in an easily accessible waterproof container or box.
4. Mount the Engine at the stern (back) boundary of the boat. There's an sphere in the Centre of the stern where the Engine Testament be connected with the boat Engine brackets you compass purchased from a boat dealer or marine supply store. The mounting can be done by placing the brackets on the Engine anterior and then attaching the boat to the stern (or vise versa). Attach the hose to the fuel nozzle of the motor per the instruction manual and the other end to the gas tank. In the middle of this hose is a hand siphon that will allow you to prime the motor with gas in order to begin it. After you start the motor, the gas pumps itself, so no other siphoning is usually needed.
5. Inspect your setup when you are finished. Make sure all connections are secure, such as the motor and motor brackets, fuel lines and battery cables.
