Pull the strut gone from under the Grand Caravan and settle it on a Apartment lodgings surface. Dwelling the spring compressors on the coil spring. Tighten the spring compressor bolts using a socket and ratchet until the energy is off the meeting.
Instructions
1. Lawns the 2001 Dodge Grand Caravan on a constant surface with the wheels straight. Turn off the ignition and put a allot of trundle chocks latest the rear wheels. Loosen, however cook not remove, the lug nuts on the shove you are starting with using a lug wrench. Lift the front of the car on the side you are working on using an machine jack. Assign a jack stand under the frame of the vehicle near the jacking stop and hoist it up to the frame.
2. Disconnect the brake hose bracket from the strut using a wrench. Disconnect the harness bracket for the turn precipitation sensor from the strut provided one is commenced on your Grand Company. Disconnect the stabilizer bar link using a socket and ratchet to loosen the peanut. The stabilizer bar link is the stuff that connects the sway bar to the lower ascendancy arm on the Grand Troop.
3. Remove the nuts from the bolts securing the strut to the steering knuckle using a socket and ratchet. Ownership the bolt with a wrench to grip it from turning when you are removing the kernel. Cleared the engine compartment and remove the upper strut nuts using a socket and ratchet.
The 2001 Dodge Grand Caravan came with the Election of two contradistinctive engines, the 3.3- and 3.8-liter, and two trim levels, the representation Sport and ES. The Dodge Grand Company and came with an front independent suspension manner consisting of struts. The length of date it takes for a strut to wear is relative to vehicle milage and the terrain it travels.The manufacturer recommends changing the struts at on all sides of 40,000 miles. Pennies the struts when they longing it, seeing it makes a smoother and less-bouncy manage, on the other hand it is besides a safety hazard whether you let struts bang unattended.4. Remove the devotee from the piston rod using a wrench. Remove the spring seats and coil spring from the elderly strut. Lay the spring seats and coil spring on the latest strut. Install the piston kernel using a socket and ratchet. Remove the spring compressors by loosening the adjusting bolts with a socket and ratchet. Install the late strut meeting on the Grand Company and loosely install the bolts to secure the strut to the spin knuckle.
5. Install the upper strut nuts and tighten them to 21 foot-pounds using a torque wrench. Tighten the bolts securing the strut to the steering knuckle to 60 foot-pounds using the torque wrench. Connect the stabilizer bar link and torque the peanut to 65 foot-pounds with the torque wrench. Connect the wheel speed sensor to the strut and torque the nut to 10 foot-pounds if one is present on your Dodge Grand Caravan.
6. Connect the brake hose bracket to the strut and torque the nut to 10 foot-pounds using the torque wrench. Place the wheel on the Grand Caravan and tighten the lug nuts using the lug wrench. Raise the automobile with the automobile jack high enough to remove the jack stand from under it. Lower the Dodge to the ground. Tighten the lug nuts again using a star pattern to make sure they are tight. Repeat the procedure on the other side of the Grand Caravan.
