Installation requires 30 minutes provided you employment the cars horn, or an generation whether you install a siren.
Instructions
1. Recite the manufacturer's installation handbook and describe all of the parts and connections.Expert alarm installers liking working on a Honda CR-V considering the van is pre-wired for the alarm. This makes the Honda CR-V a acceptable van for you to install the alarm yourself and save mode. Installing an alarm in the Honda CR-V much requires a basic responsive of van electronics and wire identification.
Extensive the hood and remove the persuaded battery cable from the terminal. Mount the siren in an ajar world of the engine bay, provided desired. Face the siren In relation to the engine and drop the wires terminated the firewall in front of the steering turn.
2. Slide the driver side seat back as far as it Testament drive and remove the fuse box panel and lower sprint panel on the Chauffeur's side. Fix the influential wire bundle under the sprint and attach the alarm control console to it with zip ties. Locate the white power wire in the fuse box and plug the connector into it.
3. Mount the shock sensor under the dash, just to the side of the stereo. Run the wires back to the control module. Plug the power lock module into the power lock relay above the fuse box.
4. Snap out one of the dash blanks on the left side of the dash and drill a small hole in it for the LED. Snap the LED into place and connect the wire to the control module.
5. Locate the starter wire in the ignition wire bundle and connect the start disable relay. Wire the relay, power, lock module and horn relay into the control module.
6. Reconnect the positive battery cable on the Honda CR-V and test the alarm. Make adjustments to the alarm sensitivity level as needed.
