Replace the Voyager's EGR valve to prevent exhaust problems.
The exhaust recirculation valve (EGR valve) on your 2000 Chrysler Voyager 2.4 recirculates the exhaust gases back into the engine so that they can be burned again. This lowers engine temperatures during accustomed engine system and reduces engine emissions. By reason of the valve is constantly exposed to exhaust gases, carbon can habit up on it, causing the EGR valve to stick or preventing it from opening at all. When this happens, your Voyager can carry problems idling, however you'll mostly feasible observance a important "bucking" difficulty when you slap to accelerate.
Instructions
1. Ajar the hood of the vehicle and allot the EGR valve on the intake manifold, at the back of the engine. The valve is Hand-bill in shape and has a tube running down to a seperate quota of the Element with an electrical force connector.
2. Allot the plug on the EGR valve. The EGR valve for the Voyager, unlike many EGR valves, has the plug located off to the side of the actual valve. Squeeze the capacity connector tabs and disconnect the ability running to the valve.
3. Unbolt the two mounting bolts located at the example of the valve and remove the valve.
4. Disinfected the mating surface of the intake with carburettor cleaner and with a nylon bristled brush. This Testament cater a exceptional mating surface for the different valve.
Secure the valve to the manifold, using the factory mounting bolts and a socket wrench.7. Plug the electrical connector back into the EGR valve. Make sure the connector is secure and locks into place.
5. Position the virgin valve into country on the intake manifold and align the mounting holes on the valve with the holes on the manifold.6.
