Hang the muffler assembly on the hangers and tighten the remaining hardware.13. Adjust the newly installed Corolla exhaust system as needed. Tighten hardware and fasteners from the front of the vehicle to the rear.
Instructions
Uninstalling Stock Exhaust
1. Lift the Corolla off the ground using a hydraulic lift or circle jack and jack stands. Allowance Sufficiently space underneath the vehicle to duty on the exhaust system components efficiently.
2. Unbolt the muffler meeting from the swivel bolt flange located on the antipodean objective of the muffler from the tailpipe using the socket and wrench establish. There Testament be two flange nuts mating the front pipe and muffler assembly piping well-balanced.
3. Lift the muffler meeting off the hanger hooks and pull it elsewhere from its mounted position.
4. Levy the muffler meeting and all the much the same hardware and insulators off to the side. Achieve not lose any of these components since they may be used during the exhaust replacement installation.
5. Unbolt the chassis brace, located underneath the front drainpipe. The front conduit is located after the resonator assembly. Remove the front pipe and place it off to the side along with all its hardware.
6. Remove the original resonator assembly if your new exhaust system includes a replacement resonator. In this case, cut the original resonator piping one to three inches in front of the weld melding the resonator assembly to the exhaust piping leading towards the engine.
7. Prepare to install the new exhaust.
Installing New Exhaust
8. Install the front resonator assembly using the hardware and clamps provided by the new exhaust system after slipping it over the recently cut original piping. Install the new exhaust components from the front of the vehicle towards the rear.
9. Bolt the exhaust hangers in place starting with those that hold the resonator assembly.
10. Install the front pipe to the resonator assembly using the provided or stock hardware using the socket and wrench set. Reconnect the chassis brace. If applicable connect the front pipe to the necessary hangers.
11. Mount the muffler assembly. First connect and bolt the swivel bolt flange mentioned above using the two flange nuts.
12.The fundamental hour (1968-69) Toyota Corolla was the manufacture's smallest vehicle ever released in the USA at that period. The moment age Corolla became the second-best selling automobile in the earth, as stated by Edmunds. As of Dec 2010, the Corolla is in its tenth hour. The eighth and tenth engendering featured alike exhaust method designs, and installing an exhaust course for the 2001 to 2003 Toyota Corolla S 1.8-liter I-4 requires a vehicle lift, a socket wrench fix, wrench establish and aphorism with a blade capable of cutting metal.
14. Lower vehicle back onto the ground.
