The 1995 Nissan Pathfinder 3.0-liter V6 engine has two ignition modules on it. There is a appropriate and a left module on the head of the ignition coil on either side of the engine. Replacing one or both uses the twin course on the contrary the modules are not interchangeable--be undeniable to receive the equitable side whether you are single changing one. The modules are available from most Car parts stores.
Instructions
1. One the hood of your Pathfinder and allot the contradiction battery cable on the battery. Remove the retaining bolt with a wrench, then remove the battery cable from the terminal. Probation the repair by starting the engine to verify it is running properly.
3. Disconnect the wiring harness connector from the top of the module by releasing the locking tab on the connector, then pull it straight off the module. Situate the connector aside.
4. Remove the two mounting bolts that secure the module to the bracket, using a wrench, then remove the module from the bracket and discard it. Corner the fashionable module in dwelling and install the mounting bolts nailed down it. Thread the bolts into the bracket, then tighten them with a wrench.
5. Install the wiring harness connector on the module, pushing it down until the locking tab engages. Movement to the diametrically opposed side of the engine compartment and repeat the growth to alternate the moment module, provided required.
6. Install the negative battery cable on the counteractive battery terminal, then install the retaining bolt. Tighten the bolt with a wrench until the cable is secure. Isolate it from the battery.2. Allot the ignition coils on the top of the engine, one on Everyone side of the intake manifold. The ignition module bolts to the rear of the coil mounting bracket.
