Whirlpool tubs pulsate imbue on sore areas of the target to relax and enliven you.
MTI whirlpool tubs embrace three types of jets for pulsating inundate to sooth muscles, aches and pains. The largest of the three is a mark massage jet that pulsates with the most water flow to help distress in stress points. The rotary jet is the medium vastness jet, and the micro jets are in MTI whirlpool tubs as sets of two or four. Everyone type of jet has different adjustments for the water flow, and all jets adjust simultaneously with increases and decreases in the blower celerity.
Instructions
Point Massage Jet Adjustment
1. Emptied the jet for imbue flow by turning the jet nozzle counterclockwise. The nozzle is in the Centre of the jet where the flood flows elsewhere.
2. Turn the nozzle clockwise to shut the jet. Turn the nozzle fully to the correct to shut the jet entirely with no drench flow.
3. Adjust the moisten flow standard in between altitudinous and low by turning the nozzle partially in either trail. These jets are throughout the tub in areas to supply whirlpool drool to emphasize points on the back, neck and shoulders.
Rotary Jet Adjustment
4. Turn the face of a rotary jet clockwise to diminish the flow of aqua, or turn it clockwise to shut the jet and confess no moisten to flow. Rotary jets are the medium magnitude jets that check in To possess an opening inside of an opening with protruding tabs on two sides of the outer opening.
5. Grasp the protruding tabs, and turn the rotary jet counterclockwise to increase water flow or fully counterclockwise to close off the water flow.
12. Adjust the blower speed to increase and decrease the amount of air pushing the water for more or less intense water flow in all of the jets that are in the "On" position.
7. Turn the volume control diverter valve off on the pump or on the remote control to turn the micro jets off. Micro jets are the smallest jets with two or four per set that are directed to the neck or back in an MTI whirlpool.
8. Use the remote control to function the micro jets in conjunction with each other. The adjustments on the volume diverter control all of the micro jets in the two or four set on the whirlpool tub.
9. Turn all of the micro jets on or adjust the flow higher for more water pressure on sore, stiff neck and back muscles.
Blower Speed Adjustments
10. Increase the blower speed on the remote control by holding the blower plus button and releasing at the correct intensity.
11. Hold the blower minus button to diminish the blower speed, which will lessen the amount of water flow.
6. Make incremental adjustments between fully on or off by turning the nozzle partially in either direction.
