In 2002, Toyota started manufacturing a Camry with brake pedals that adjusted forward when needed. You equitable push a Press-stud to conceive it happen. For a Toyota Camry false before 2002, you can adjust the brake pedals yourself by later these steps.
Instructions
1. Allot the brake yoke under the sprint, dependable above the brake pedal and over to the side.
2. Succeed the pedal upward to the aim at which it attaches to the push rod. This distance allows the brake pedal to pull the push rod back all of the way. Once this happens, the brake servo will be able to function correctly.6.
Proceeds the push rod locking nuts with a 17-mm wrench. The push rod should not turn. Provided it does, turn it back so that the speck is in front of you. You may necessitate to advantage one wrench to dominance the bracket and another to break loose the nut.
4. Take hold of the push rod with pliers. Turn until you have loosened the lock nuts. Twist the push rod around, using a 10-mm wrench to lengthen or shorten the pedal height. The brake pedal does not need to adjust to the full height of the throttle.
5. Leave a minimum of 3 mm (less than 1/4 inch) distance from the brake stop to the brake pedal. The pedal will automatically stop at the rubber grommet positioned on its path toward the bracket. Settle a dab on the push rod with a marking pencil or some Spike polish. Communication the position of the iota to grasp the rod facing the hold together plan. Control an eye on this during the career and evaluation again when you are down.3.
Retighten the lock nut. Adjust the brake light switch, if necessary.
