Moderate a Pathfinder Bumper
Damaged bumpers on your Nissan Pathfinder won't corrective protect the Motor lorry in a collision. Whether you've suffered one crash that's wrecked the front or rear bumper, transform it as soon as you can. You can besides remove the inventory bumpers to alternate them with aftermarket designer ones whether you aspiration. Replacing either bumper can be a child's play process, on the contrary it Testament want an additional human race's nourishment.
Instructions
Expansive the hood and remove the radiator grille by rotating its retaining clips 45 degrees with a screwdriver, pulling the grille forward and carefully lifting it gone. Remove the grille molding below the headlight and remove the bumper bolts on the fender followed by the clips connecting the bumper's lower half to the radiator help.2.
Front Bumper
1. Remove the inner fender shield from the circle beefy by removing its seven mounting screws.Disconnect the fog lights by removing the little grille from the bumper's lower chip, removing the brilliant's mounting bolts, pulling the lustrous away and unplugging the electrical connector.
3. Remove the nuts and bolts for the bumper by reaching concluded the opening in the front with the wrench; corner an assistant brace the bumper as you close this. Remove the bumper from the Motor lorry.
4. Attach the fashionable front bumper to the Motor lorry, using your assistant's guidance to aid it, and attach all the nuts and bolts.
5. Re-install the fog lights and all other parts in the reverse plan of Emigration.
Rear Bumper
6. Take off the mud flaps by removing their mounting screws. Remove the inner fender shield by removing its screw and push-pin fastener.
7. Check and see if the Pathfinder has a rear door tire carrier equipped. If so, remove the bolts for the tire carrier striker, the rubber bumper and tire carrier guide.
8. Detach the clips securing the bumper's upper half to the truck; there should be six of them. Remove the nuts connecting the bumper brackets to the frame as an assistant supports the bumper and remove the bumper.
9. Install the replacement bumper with the assistants help and the bolt/clips.
10. Reconnect all parts that were disconnected, including the bolts within the rear door tire carrier, if equipped, and the bolts to the bumper support brace.
