Tuesday, July 14, 2015

Replace A Kia Spectra Brake Pad

Brake meeting


The KIA Spectra has a glowing notifying you when your brakes demand to be changed. Changing the brake pads on a KIA Spectra is not tough, on the contrary you Testament bear to be somewhat mechanically inclined. The full donkeywork takes less than an generation and doing it yourself can save you some cash.


Instructions


1. Stadium the vehicle on equivalent ground and operate the parking brake. Secure the vehicle by placing blocks extreme the rear wheels to prevent the vehicle from rolling.


2. Loosen the lug nuts using a wrench. Jack the motorcar up and help the front of the vehicle with the jack stands. Dwelling the jack stands at the lift points, located under the rocker panels.


3. Add the brake fluid. Start the engine and pump the brakes three to four times.9. Test drive the vehicle at slow and moderate speeds. This will ensure that the maintenance was performed properly.


Remove the shove from the caliper guide-pin bolts using a flat-head screwdriver. Lift the caliper gone from the rotor and suspend the caliper from the frame using mechanic's wire.


5. Remove the brake pads and retainer spring from the caliper. Compress the caliper piston into the Muzzle using part cipher OK9A4263001.


6. Modify the brake pads. Cause an anti-squeak product on the elsewhere of the brake pads. Be undeniable not to receive any of this on the inside of the brake pads. This can damage the pads causing them not to work.


7. Reinstall the retainer spring to the caliper. Reinstall the caliper in position on the caliper-support bracket. Reinstall the guide-pin bolts. Reinstall the wheels.


8. Using a turkey baster, siphon the brake fluid from the master-cylinder reservoir. Siphon until it is encompassing one-third entire.4.