Provided your bike tire is punctured badly, you hog to boot it.
It's one factor to allot your Apartment lodgings tire by pulling the punctured tube outside of the tire, and stuffing your spare one in--it happens to cyclists all the age. On the other hand what happens when you gratify a poor puncture in the tire itself? There are no patches for punctured tires, and cyclists seldom transact spare tires. To receive national safely on a badly punctured tire, sometimes you own to boot the tire to detain the fresh tube from bulging outside concluded the puncture.
Instructions
1. See the tire from the gone. Pride the reason that punctured the tire and remove it. Stop the spot by scratching the sidewall with your Toe-nail whether the puncture it is not exposed.
2. Proceeds the brake caliper lever on top of the brake calipers on the punctured tire, opening the calipers. Turn the bicycle over and balance it on the handlebars. Pull the quick-release skewer lever emptied on the axle, releasing the tire from the bike’s frame.
3. Pull off the rotate. Include the tire lever between the tire and the rim and slide it environing the circumference of the rotate, breaking the tire bead loose from the rim.
5. Slide your fingers inside the tire spinning the tire sorrounding in your hands as you observe for any objects that could puncture the tube and remove them.6.
4. Return the valve-stem cap off the tube and push the valve stem back wrapped up the gap in the rim. Pull the tube gone of the tire.
Baggage the new tube into the tire. Blow a small amount of air into the tube, making it round. Locate the tire puncture that you marked with your fingernail.
7. Fold the dollar bill twice lengthwise. Slip the dollar bill in between the tube and the puncture on the tire. Center the dollar bill over the puncture.
8. Carefully push the tire back on the rim with your thumbs from the bottom up so the last push is directly in front of the puncture and you're sure the dollar stays in place, centered under the puncture.
9. Pump up the tire just enough to ride your bike. Put the valve stem cap back on, mount the tire back on the bike, tighten the quick-release and brake levers, and test ride the bike. If the bike handles poorly or feels unstable, put more air in the tire, and ride home slowly.
